ROMEO sets the first steps towards innovative technologies to reduce O&M costs in offshore wind

||ROMEO sets the first steps towards innovative technologies to reduce O&M costs in offshore wind

ROMEO sets the first steps towards innovative technologies to reduce O&M costs in offshore wind

08/June/2018                   

ROMEO will bring innovative technologies based on predictive model maintenance to reduce the O&M cost in the offshore wind energy sector.

Key European companies in the sector are working together to exploit the potential of offshore and contribute to the competitiveness of Europe.

Ramboll company headquarters in Copenhagen (Denmark) have recently hosted the General Assembly of ROMEO coinciding with the first year of the project.

 

After one year from ROMEO’s kick off meeting, consortium partners have met the 5th and 6th of June in Copenhagen to celebrate their General Assembly. The main objective of this internal meeting is to perform a follow up of the project and define the next steps in order to achieve the success. All consortium partners have had the chance to show the project progress and coordinate the next steps.

The meeting has been hosted by Ramboll, in Copenhagen, marking a milestone in the development of ROMEO.

The General Assembly meeting is a useful opportunity to develop constructive discussions about the different areas, and, to move forward towards the final objective of the project: reduce the cost of offshore wind energy and boost the renewables industry.

ROMEO project aims to reduce the operation and maintenance costs of offshore wind farms through the use of advanced monitoring strategies and tools, as well as to analyse the performance of the wind farm turbines in real time.

To reach this achievement ROMEO develops a cloud-based platform which will accommodate models for diagnosing and predicting faults in WT components. This platform will promote better understanding of the performance of the main wind turbine components in operation.  aiming to extend their lifetime and to reduce operation and maintenance costs.

Project requirements defined as a solid roadmap

 During the first year of ROMEO, project requirements have been defined as a solid roadmap to ensure that is developed under a methodical approach towards a condition monitoring strategy for relevant critical components.

Additionally, a common framework for structuring the project and the designations to be used has been established. This is particularly important for the three windfarm pilot scenarios in terms of turbine and structure components. ,

As one of the first steps of ROMEO project, FMECA workshops were organized. The objective of the Failure Mode Effect Analysis Workshops was to define components/failures to be analysed in the project, both for the wind turbine and the substructure. The failure modes that apply for predictive maintenance were identified according to their criticality. The output of this set of workshops laid the basis for validation of the technical work packages included in the project.

Backbone of O&M Information Management Platform starts to be developed

Other key milestone that will allow set the solid structure of the project is the O&M information management system already configured. The platform will be able to suit processing and interrogation of all incoming data streams, from a variety of sources from both, human and machine interfaces.

At the same time, ROMEO has started the development of physical models for a running design and specification of support structure monitoring problem for wind warms is already done.

ing the KoM, the partners also discussed the progress of the three pilot tests that will be developed in the framework of ROMEO and will allow to test and verify the data analytic and O&M tools. Last December Iberdrola successfully connected Wikinger (Germany) wind farm, one of the three multi-scale offshore pilots. Some innovations of the project will be also tested at Teeside and East Anglia ONE (both in the UK) wind farms. To that end, the definition of architecture for data acquisition and analytics ecosystem has been almost finished for the 3 pilots during the first 12 months of the project.

The meeting has been also a good chance to present the latest advances of the dissemination and communication strategy of the project focused on reaching the stakeholders and the general public, building a solid ROMEO knowledge.

Finally, steps towards the definition of the exploitation strategy of the project have been defined. Partners are working on the definition of their results, products and services expected to hit the market.

Through their participation in relevant events and conferences, is expected that ROMEO partners will reach all the main stakeholders of the sector. On this way the ROMEO project will contribute to improve the wind Energy sector, as one of the most innovative in the world and the best set down at the forefront of the European industry.

2018-06-08T13:37:41+00:00

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close